Axis CAMERA RECORDER 1.1 Manual de usuario descargar pdf (Pagina 15)

AXIS Camera Station Control Buttons

View Selection Select a view and you will get a window showing live

images directly from the camera.

No Live Images

Click the No Live Images button to close the camera

windows. Showing live images in the main window

uses a lot of processor power. Not displaying live

images reduces the amount of processor power

required by the service, whilst not affecting recordings

in any way. The amount of bandwidth required is also

less when not showing live images. In the Views sec-

tion of the Administration pages it is possible to set up

the system so that it always starts in this mode

Select Camera Select a camera to be shown in a new window. Choose

this if you want to close the view windows (and thus

save on processor power) but still want a single camera

view visible on your desktop.

Monitoring I/O When clicking this button, the I/O Status of all units

are displayed. Monitoring I/O defines when events,

such as an alarm or motion detection, should be

triggered. Each I/O is shown on one line, along with a

colored indicator:

• green indicator means the I/O is in its normal state

• red indicates that the I/O is active, recording in

progress

• yellow means there is no communication with the

I/O

Buttons for starting and stopping an I/O output are

also shown.

Camera sequence Click to open the Camera sequence window. A camera

sequence is a pre-defined "camera tour" i.e. a

configuration that automatically switches through all

of the cameras included in the tour. Select the camera

sequence to view from the drop-down list.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Axis CAMERA RECORDER 1.1 Manual de usuario Pagina 15