Axis 5800 Manual de usuario descargar pdf (Pagina 8)

Manual IP address assignment AXIS 5800+ Mobile

Setting the IP address using ARP

Refer to the appropriate section below to assign an IP address to your AXIS 5800+ using

ARP:

Windows 95, 98, NT, Me, 2000, XP

Open a Command Prompt and enter the following syntax:

The host will return

reply from 192.168.3.191, or a similar message. This indicates that

the address has been set and that communication is established. You are now ready to

print using FTP or Reverse Telnet.

UNIX, Mac OS X

Open a Terminal and enter the following syntax:

The host will return

psname is alive, or a similar message. This indicates that the address

has been set and that communication is established. You are now ready to print using FTP

or Reverse Telnet.

Notes:

Syntax Example

arp -s <Internet address> <Ethernet address>

ping <Internet address>

arp -d <Internet address>

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

arp -d 192.168.3.191

Syntax Example

arp -s <host name> <Ethernet address> temp

ping <host name>

arp -s psname 00:40:8c:10:00:86 temp

ping psname

• The Ethernet Address is the same as the serial number, found on the print server’s underside

label. Enter the Ethernet Address in the same format as in the example above.

• The ability to set the IP address with arp and ping will only be enabled the first ten minutes

after re-booting the print server.

• When you execute the ping command for the first time, you may experience a significantly

longer response time than usual.

•The arp command varies between different UNIX systems.

• You need root privileges on your UNIX system in order to execute the arp command and run

axinstall (refer to the AXIS 5800+ User’s Manual for more information).

• Some BSD type systems expect the host name and serial number in reverse order. Furthermore

IBM AIX systems will require the additional argument ether.

Example: arp -s ether <host name> <Ethernet Address> temp

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Sin comentarios

Axis 5800 Manual de usuario Pagina 8