Axis AXIS 5900 Guía de instalación descargar pdf (Pagina 13)

AXIS 5900 Configuring the AXIS 5900 for wireless printing 13

5. To access the WLAN settings page, click Network Settings | Detailed View | WLAN

WLAN Parameters

Refer to the table below for a description of the WLAN parameter settings used to configure the

AXIS 5900 for wireless printing:

WLAN Parameters Description

WLAN Node Address The WLAN node address that is identical to the AXIS 5900 serial number which is

found on the underside label on the print server, e.g.

Note:Ser.No: 00:40:8C:18:16:36

WLAN Node Address: 00 40 8C 18 16 36

WLAN Network Speed Select the appropriate network speed according to your network environment or

select Auto Sense

WLAN Network Mode Select Ad Hoc mode for peer to peer printing or Infrastructure mode for wireless

communication via an access point.

Note: The WLAN Network Mode must match the mode of the workstation /

laptop. This is set using the computer’s wireless configuration software.

WLAN SSID The default SSID (service set identifier) in the AXIS 5900 is ’AXIS’ followed by the

last six digits of the serial number, e.g. AXIS181636

Note: the SSID must match the SSID of the WLAN network interface. This is set

using the computer’s wireless configuration software.

WLAN Channel The default setting is channel 11 (Japan - channel 14)

WLAN Fragmentation

Threshold

These parameters are used to optimize the data transmission in accordance with

the IEEE 802.11b standard.

WLAN RTS Threshold

Detailed View

Network

Settings

Help

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sin comentarios

Axis AXIS 5900 Guía de instalación Pagina 13