Axis P1311 Guía de instalación descargar pdf (Pagina 14)

Page 14 AXIS P13 Network Camera Series Installation Guide

5. Gently turn the lens anti-clockwise until it stops.

6. Finally, turn the lens slowly clockwise until the status indicator flashes green or amber (not

red).

7. To exit the Focus Assistant, press the Control button again.

Note:

The Focus Assistant is switched off automatically after 15 minutes.

8. Retighten the focus puller.

9. Open the Live View page in the web browser and check the quality of the image.

10. Continue with steps 6 - 8 on page 12.

Notes:

• The view in front of the camera should not be changed during focus adjustment (steps 5 and 6). If the

camera is moved, or if a finger or other object is placed in front of the lens, steps 3 - 7 will have to be

repeated.

• If movements in front of the camera cannot be avoided, the Focus Assistant should not be used.

• If the Control button is not released within two seconds, AXIS Dynamic DNS Service is enabled instead

of the Focus Assistant.

• If the camera is mounted so that the Control button cannot be accessed, you can still use the Focus

Assistant. Follow the instructions above but mount the camera after step 4 (pressing the Control

button) instead and skip step 7.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 113 114

Sin comentarios

Axis P1311 Guía de instalación Pagina 14