Axis 950 Manual de usuario descargar pdf (Pagina 11)

Section 2: Basic Installation

AXIS 850/950 User’s Manual 11



3. Set the SCSI address of the external drive.

Each connected

drive must have a unique SCSI address. SCSI addresses 0 through

6 may be used. For Axis 851 and Axis 951 we recommend SCSI

address 0 for the internal drive. See the CD-ROM drive

documentation for instructions on how to set the address.

4. Connect a SCSI terminator to the last drive in the SCSI chain.

All other external CD-ROM drives must not be terminated. See

also “SCSI Devices and Termination” on page 12. For

instructions, see the CD-ROM drive documentation.

5. Connect power to all external CD-ROM drives and switch

them on.

6. Connect power to the Axis CD-ROM Server.

The CD-ROM

server indicators will flash during power-on and self-test. When

the STATUS indicator stops flashing and remains unlit, the CD-

ROM server is ready for use.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 68 69

Sin comentarios

Axis 950 Manual de usuario Pagina 11