Axis APPINT Manual de usuario descargar pdf (Pagina 9)

• Scanning profile used.

• Paper size.

• Number of pages.

If you selected Include Image Information: Complete, then additional information, such as

resolutions and file format, is also included.

Your application can use values in the information file to trigger actions.

)\EQTPISJMRJSVQEXMSRJMPI The following example is taken from a real scanning, with the

pre-defined scanning profile Text. Here, Image Information Included is set to Complete. If it

was set to Basic, the Image Information part would not be present.

; AXIS 700 Parameter List, V1.10 Jul 29 1998

[General]

File name = branko_subasic001.tif

File size = 71413

Host address = 172.19.4.22

Scanner = FCPA ScanPartner 600C

Destination = Branko FTP

Profile = Text low

Paper size = Letter

Number of pages = 2

[Image Information]

Width = 1696

Height = 2200

Resolution (DPI) = 200

Bits per pixel = 1

Data type = Black & white

Paper orientation = Portrait

Format = CCITT G.4

Double-sided = Off

Intensity = 50

Contrast = 50

; End of Parameter List

It is important to notice that the information file is always written after the image file. Thus

when your application processes the information file the image file itself is guaranteed to be

there already.

)\EQTPI A document distributing system may check the file name to see whom the image is

targeted for. The file name may then be on the form name_lastNameXXX.tif, where XXX is

the sequence number optionally appended by your AXIS 700. Your application can now

decide whom to send the image to.

)\EQTPI A fax server application can use the image name to obtain the fax number, and the

file format to decide how to convert the document to fax data.

See the AXIS 700 Additional Installation Note, Setting Up Your AXIS 700 for Scan-to-File for

information on how to define Scan-to-File destinations.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Axis APPINT Manual de usuario Pagina 9