Axis QIG5800 Manual de usuario descargar pdf (Pagina 6)

Step

UNIX/Linux only: Set the IP Address Manually

If you succeeded in logging in to your print server’s web pages in Step 2, your print server has

already received a valid IP address. Skip to “ Configure a Printer ” (Step 4)!

Set the IP address:

1. Type the following commands in the shell window:

arp -s <host name> <Ethernet address>

ping <host name>

(You can replace the host name with the IP address)

Example:

arp -s PS5800 00:40:8c:10:00:86

ping ps5800

2. The host will return ps5800 is alive, or a similar message. This indicates that the

address has been set and that communication is established. You are now ready to print

using FTP or Reverse Telnet.

Notes:

■ The ability to set the IP address with arp and ping will only be enabled the first ten

minutes after re-booting the print server

■ DHCP, RARP and BOOTP can be used to set the IP address in UNIX, see the AXIS 5800

Mobile User’s Manual for details.

■ You need root privileges on your UNIX system in order to execute the arp command and

run axinstall.

■ When you execute the ping command for the first time, you may experience a

significantly longer response time than usual.

■ The arp command varies between different UNIX systems.

■ Some BSD type systems expect the host name and node address in reverse order.

Furthermore IBM AIX systems will require the additional argument ether.

Example:

arp -s ether <host name> <Ethernet address> temp

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Axis QIG5800 Manual de usuario Pagina 6