Axis P1214-E Guía de instalación descargar pdf (Pagina 15)

AXIS P12 Series Installation Guide Page 15

ENGLISH

AXIS P1214 Sensor Unit

The AXIS P1214 can be mounted behind any wall, with just a small opening for the lens, or with the

whole lens assembly protruding through the wall.

1. Drill a hole with 20mm diameter in the wall, either completely through the material, or use a

countersink cutter to have a smaller opening.

2. Pull off the protection on the adhesive and attach the mounting bracket to the wall. Optionally

secure the bracket with two screws through the holes.

3. Insert the camera and tighten the lock ring. Position the camera so that the flat surface on the

thread is vertical or horizontal.

4. Proceed to Connect the cables, on page 18.

IMPORTANT! - The casing of the AXIS P1214 sensor unit is not approved for outdoor

use - the product may only be installed in indoor environments.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 97 98

Sin comentarios

Axis P1214-E Guía de instalación Pagina 15