Axis Q6035-C Guía de instalación descargar pdf (Pagina 10)

Page 10 AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide

Network connector SFP (external) - Two SFP connectors (100Base-FX/1000Base-X) for network

connectivity.

Each RJ-45 and SFP connector has its own dip switch. The dip switches control how the port

forwards data. See the User Manual for more information.

Network connector (internal) - Two 2-pin Ethernet terminal blocks.

I/O connector (external) - 6-pin configurable I/O terminal block, which

is connected to the camera through the multi-connector cable. Use with

external devices in combination with, for example, tampering alarms,

motion detection, event triggering, time lapse recording and alarm

notifications. In addition to ground and power (DC output), the I/O terminal connector provides the

interface to:

• Digital output — For connecting external devices such as relays and LEDs. Connected

devices can be activated by the VAPIX® Application Programming Interface, output buttons

on the Live View page or by an Action Rule. The output will show as active (shown under

System Options > Port & Devices > Port Status) if the alarm device is activated.

• Digital input — An alarm input for connecting devices that can toggle between an open and

closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a

signal is received the state changes and the input becomes active (shown under System

Options > Port & Devices > Port Status).

Dip switch position Description of use

Default (middle) B When connecting to the network, directly or through a router or network

switch.

Left A When connecting to a camera or a device that is not intended for viewing

data.

Right C When connecting to another media converter switch.

Function Pin Notes Specifications

GND 1, 4, 6 Ground

DC output 2 Power out 12 V DC, 50 mA

Configurable I/O 1

(Input or Output)

3 Digital input 0 to +30 V DC

Digital output (transistor – open

collector)

Max load = 100 mA

Max voltage = +30 V DC

Configurable I/O 2

(Input or Output)

5 Digital input 0 to +30 V DC

Digital output (transistor – open

collector)

Max load = 100 mA

Max voltage = +30 V DC

365

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comentarios a estos manuales

Sin comentarios

Axis Q6035-C Guía de instalación Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Axis Q6035-C