Axis Q6035-C Guía de instalación descargar pdf (Pagina 12)

Page 12 AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide

Multi-Connector Cable

The supplied multi-connector cable is required in order to maintain the camera’s IP rating.

Connect the multi-connector cable to the camera’s multi-connector and to the

connectors in the supplied media converter switch, see illustrations on page

page 6 and page 8. The cable provides the following signals:

•DC power

•Network (Ethernet 10/100Base-T)

•I/O

Function Pin Wire Notes Specifications

Configurable

(Input or

Output)

2, 7 Blue, yellow Digital input – Connect to GND to activate, or

leave floating (unconnected) to deactivate.

0 to +30 V DC

Digital output – Internal connection to ground

when activated, floating (unconnected) when

deactivated. If used with an external relay, a

diode must be connected in parallel with the

load, for protection against voltage transients.

Max load =100 mA

Max voltage =

+30 V DC

RX+ 3 Green/white Ethernet – receiving

RX- 4 Green Ethernet – receiving

TX+ 5 Orange/white Ethernet – transmitting

TX- 6 Orange Ethernet – transmitting

GND 8 Black Ground

12 V Power 1, 9 Red Used to power camera 12 - 13.2 V DC

Max load = 6 A

1 8

2 7

3 6

4 5

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Sin comentarios

Axis Q6035-C Guía de instalación Pagina 12