Axis 670e Guía de usuario descargar pdf (Pagina 20)

Mainframe SNA Printing AXIS 5470e/570/670e User’s Guide

Verifying the communication link

1. Power on the Print Server and wait for 2 minutes.

2. Press the AXIS 5470e/570/670e test button once to print a test page and ensure that the SNA

status is defined as

Idle, Actv, LU-1 or LU-3.

The AXIS 5470e/570/670e is now ready for use in the SNA environment.

Notes:

If the LAN media at the remote (Print Server) location differs from that at the host location (e.g.

Remote LAN = Ethernet and Host LAN = Token Ring), the MAC address definitions must be

modified, as outlined below:

Print Server Modifications:

The AXIS 5470e/570/670e Host MAC address (H1_MAC_ADDR) must be bit-order reversed for

each byte,

e.g. if the host address is 08005AB77D49 the converted address will be 10005AEDBE92.

Host Modifications:

The required Host modifications are dependent upon the VTAM definition for the Major Node

where the Print Server definition is placed.

• Case 1 - VTAM Major Node definition is a Switched Major Node.

The MAC address of the AXIS 5470e/570/670e must be bit-order reversed in the PATH entry.

An AXIS 5470e/570/670e with a MAC/node address of 00408C1B06D4 will be defined using

the MAC/node address 000231D8602B as follows:

PA5701 PATH DIALNO=0104000231D8602B, GID=1, PID=1, GRPNM=gggggg

• Case 2 - VTAM Major Node definition is a Local Major Node.

When using a channel attached controller as gateway to the host, the MAC address of the

AXIS 5470e/570/670e is configured in the gateway. The address must be reversed, as in case 1

above.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Sin comentarios

Axis 670e Guía de usuario Pagina 20