Axis 670e Guía de usuario descargar pdf (Pagina 8)

Connecting the Printer to the Network AXIS 5470e/570/670e User’s Guide

Connecting the Printer to the Network

Follow the instructions below to connect your printer to the network:

1. Switch off the printer and disconnect the AXIS 5470e/570/670e external power supply.

2. Locate the serial number, found on the underside label of the AXIS 5470e/570/670e, and

write it down. You will need this number during the network configuration.

Note:

3. AXIS 5470e - Connect the AXIS 5470e to your printer, either directly to the parallel printer

port, or using the optional printer cable extension with the optional velcro ribbons.

AXIS 570/670e - Connect the printer to the LPT1, LPT2 or the COM1 port on your AXIS

570/670e using an appropriate printer cable.

4. Connect your AXIS 5470e/570/670e to the network using an appropriate network cable. If

you are connecting the AXIS 5470e to a Fast Ethernet network, the twisted pair cable must be

of category 5 or better.

5. Switch on the printer and connect the external power supply to the AXIS 5470e/570/670e.

The power indicator lights up. If the network indicator starts to flash, the AXIS

5470e/570/670e is correctly connected to the network.

6. Press and release the test button on the AXIS 5470e/570/670e to print a test page. If the AXIS

5470e/570/670e is correctly connected to the printer, the AXIS 5470e/570/670e internal test

page will be printed.

Each AXIS 5470e/570/670e is pre-configured with a unique node address that is identical to its

serial number.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Sin comentarios

Axis 670e Guía de usuario Pagina 8