Axis CAMERA RECORDER 1.1 Manual de usuario descargar pdf (Pagina 23)

AXIS Camera Station Administration

AXIS Camera Station User’s Manual 23

Enable Audio Check this if the AXIS 2191 Audio Module is used with the camera. This enables

full duplex live audio between camera/microphone and user. Audio from

recordings is not possible.

FTP AXIS Camera Station usually gets images from the camera via HTTP, but it is

also possible to record images via FTP, whereby the camera first pushes the

images to an FTP server, from where they are then fetched. This may be done to

e.g. reduce the power used to fetch images to AXIS Camera Station and thus

save network bandwidth.

Note:

The camera contains the settings that specify when to send images over ftp,

see your Axis camera documentation for details. The FTP server can be installed

on the same server as AXIS Camera Station or on another server within the

same Windows network.

The camera must be set up to send a file via FTP on I/O activity. This file must

be sent to c:/temp/ftpdir/alarmin/ and the file must be named so that it

contains the name of the I/O.

Example: If the I/O is named FrontDoor, the file from the camera should be

named e.g. FrontDoor.jpg or FrontDoor00045.jpg so that it is properly recognized

by AXIS Camera Station.

Note:

Live view is not possible from AXIS Camera Station over ftp, only recorded

images can be sent to an FTP server.

IIS has an integrated FTP server that needs to be enabled manually. See your

Windows documentation for instructions.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 72 73

Sin comentarios

Axis CAMERA RECORDER 1.1 Manual de usuario Pagina 23