Axis CAMERA RECORDER 1.1 Manual de usuario descargar pdf (Pagina 30)

AXIS Camera Station Administration

30 AXIS Camera Station User’s Manual

Example 1: Maximum alarm event time - Input

Example 2: Maximum alarm event time - Output

Defining an alarm event as an Input or Output is described inInput/Output, on page 38

Images to start/stop

alarm

Recording starts when motion is detected or an external alarm is triggered. By

setting the Images to start/stop alarm, it is possible to set how many images

with no action/alarm should pass before the event ends and the server returns

to its "normal" state.

When using the Alarm when motion stops option, set the number of images

with no motion allowed before the event triggers and recording is started. This

can help reduce unnecessary triggering for only very slight changes.

Event time = 5 minutes means that an

input event will time-out after 5 minutes.

If the maximum time is reached but motion is still

is created and recording continues.

detected at an input, a new alarm event

Event time = 5 minutes means that an

output event will time-out after 5 minutes

and recording will stop.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 72 73

Sin comentarios

Axis CAMERA RECORDER 1.1 Manual de usuario Pagina 30