Axis CAMERA RECORDER 1.1 Manual de usuario descargar pdf (Pagina 28)

AXIS Camera Station Administration

28 AXIS Camera Station User’s Manual

4. Next, set the motion detection sensitivity level in the Motion Detection

window. Under normal viewing conditions, i.e. when there is no motion in the

image, move the sensitivity slider until there are a few green bars in the

Motion detected bar.

5. When there is motion in the camera's image, set the Recording at slider to

the level where you want the recording to begin. If the Motion Detected bar

exceeds this setting, there will be an alarm and recording will begin.

When motion is detected with your new settings, the green Motion

Detected icon is shown. The red Recording icon is also displayed, and will

remain for several seconds, depending on the Images to start/stop setting

on the Recordings tab, see Recordings, on page 26.

When AXIS Camera Station is running, it will automatically detect if it is

day or night. This way, you can set specific motion settings for lighting

conditions. Most cameras generate "noise" in the image at low light

conditions and can initiate a false motion detection alarm. To remedy this,

select lower sensitivity (slider on far left) for the night setting.

Record to Hard Disk

Save Recordings to... Specify where to store your images. This field must always begin with a disk

drive letter, hard disk drive letters "C" to "K" can be used.

The same directory can be specified for multiple cameras, in which case sub-

directories are created in the specified directory.

Note:

1. Set the sensitivity

level of the motion

detector until a few

Tip: Set the sensitivity level on low (far left)

2. Set threshold

should begin,

HIGHLOW

where recordings

according

to the sensitivity

slider position.

- in areas showing a lot of motion, e.g. a high-way

- in low light conditions, e.g. for night setting

appear in the Motion

Detected bar.

green bars

•External storage devices can be used if they are shared and available as

shared disks in Windows.

•AXIS Camera Station’s service user must also be changed, as AXIS Camera

Station uses a default Local user: Control Panel | Administrative tools

|Services|AXIS Camera Station |Action|Properties (Log On tab).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 72 73

Comentarios a estos manuales

Sin comentarios

Axis CAMERA RECORDER 1.1 Manual de usuario Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras Bridge Axis CAMERA RECORDER 1.1