Axis AXIS USB Manual de usuario descargar pdf (Pagina 14)

Basic Installation

14 AXIS OfficeBasic USB User’s Manual

Assigning an IP Address to the Print Server

Before you Start • If you have a DHCP server on your network, your print server will

receive an IP address automatically. The IP address will then appear on

the test page you printed earlier.

• If you are not working in a DHCP network, you need to set the IP

address of the print server manually.

System Privileges You need root privileges on your Mac OS X system, or administrator

privileges on a Windows NT server to:

• set the IP address using RARP, DHCP

• add an entry to the ARP table with the command 'arp -s'

Ethernet Address You need to know the Ethernet address of your AXIS OfficeBasic USB in

order to assign an IP address to it. The Ethernet address is based upon the

serial number of your print server. This means, for example, that an AXIS

OfficeBasic USB with the serial number of 00408C100086, will have the

corresponding Ethernet address of 00 40 8C 10 00 86. The serial number

is located on the backside label of the print server.

IP Address Unless you are assigning an IP address using DHCP or AutoIP, you must

obtain an unused IP address from your network administrator.

Important:

DO NOT use the IP addresses used in the following examples when installing

your AXIS OfficeBasic USB. Consult your network administrator before

assigning an IP address to your print server.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 60 61

Sin comentarios

Axis AXIS USB Manual de usuario Pagina 14