Axis AXIS USB Manual de usuario descargar pdf (Pagina 17)

Basic Installation

AXIS OfficeBasic USB User’s Manual 17

you have connected it to the network. In the absence of a DHCP server,

your print server will automatically be assigned an IP address through

integrated AutoIP. The AutoIP address structure is: 169.254.xxx.xxx.

The AutoIP function will only work when DHCP is enabled in your print

server. This function is enabled automatically upon installation of a brand

new print server.

The easiest way to make sure DHCP and AutoIP are enabled is to reset

your print server (to Factory Default). See “The Test Button” on page 49

for instruction on how to do this.

If you perform a Factory Default on the print server and you do not have

a DHCP server on your network, AutoIP will automatically set the IP

address of the print server.

Set the IP Address

using ARP in

Windows 98/NT/

Me/2000/XP

Open a Command Prompt and enter the following commands:

The host will return

reply from 192.168.3.191, or a similar message.

This indicates that the address has been set and that communication is

established. Log in to the print server’s Web pages (see Using a Web

Browser for Print Server Management, on page 35), select Admin |

Network Settings | Detailed View | TCP/IP and define Default Router

and Subnet Mask.

You have now set the IP address of the print server. Continue to “Adding

a Network Printer to your workstation” on page 19.

Note:

Set the IP Address

using ARP in Mac OS

1. Open a Terminal and enter the following commands:

The host will return

psname is alive, or a similar message. This indicates

that the address has been set and that communication is established. Log

in to the print server’s Web pages (see Using a Web Browser for Print

Server Management, on page 35), select Admin | Network Settings |

Detailed View | TCP/IP and define Default Router and Subnet Mask.

Syntax Example

arp -s <IP address> <Ethernet address>

ping <IP address>

arp -d <IP address>

arp -s 192.168.3.191 00-40-8c-10-00-86

ping 192.168.3.191

arp -d 192.168.3.191

• When you execute the ping command for the first time, you will experience a significantly

longer response time than is usual

• The ability to set the IP address with ARP and PING will only be enabled the first 4 minutes

after restarting the print server.

• By using the arp -d command, the static entry in the arp table is removed from the

host’s cache memory.

Syntax Example

arp -s <IP address> <Ethernet address>

ping <IP address>

arp -d <IP address>

arp -s 192.168.3.191 00:40:8c:10:00:86

ping 192.168.3.191

arp -d 192.168.3.191

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 60 61

Comentarios a estos manuales

Sin comentarios

Axis AXIS USB Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Axis AXIS USB