Axis AXIS USB Manual de usuario descargar pdf (Pagina 15)

Basic Installation

AXIS OfficeBasic USB User’s Manual 15

Methods for Setting

the IP Address

You can set the IP address of your AXIS OfficeBasic USB using one of the

following methods, depending on your network operating environment:

Automatic IP Address

Assignment

Manual IP Address

Assignment

Notes:

Registering and

Resolving

Host Names

In order to register the host name of the AXIS OfficeBasic USB in

networks with dynamic IP address settings, WINS (Windows Internet

Name Service) and DDNS (Dynamic Domain Name System) are supported.

It is recommended that at least one of these methods should be used if

you are setting the IP address of the print server using DHCP.

The host name of the AXIS OfficeBasic USB is specified by the

PS_NAME. parameter. Refer to the “The Parameter List” on page 52.

WINS Host Name

Rules

WINS only supports 15 character long host names. If your host name is

longer than 15 characters, the AXIS OfficeBasic USB truncates the host

name to 15 characters when registering with a WINS server. You can view

the AXIS OfficeBasic USB host name that is registered at a WINS server

in the print server’s Web interface. Refer to “Print Server Management

Methods” on page 34.

Method Server required Comment

DHCP DHCP server

Dynamic assignment of IP addresses. See

“Set the IP Address using DHCP” on page

AutoIP Windows environment

Automatic assignment of IP addresses.

See “Set the IP Address using AutoIP” on

page 16

Method Platform Comment

arp/ping

Windows

Requires the IP address for each device to

be downloaded individually. Cannot be

used over routers. See “Set the IP Address

using ARP in Windows 98/NT/

Me/2000/XP” on page 17

Mac OS X

Requires the IP address for each device to

be downloaded individually. Cannot be

used over routers. See “Set the IP Address

using ARP in Mac OS X” on page 17

AXIS IP Jump-

Starter

Windows

Axis software that allows you to find print

servers in your network and assign an IP

address to them. This method is recom-

mended for small offices and local net-

works. See “Set the IP Address using AXIS

IP JumpStarter” on page 18

• The ability to set the IP address with ARP and PING will only be enabled the first 4 minutes

after restarting the print server.

• Refer to “Setting Parameters” on page 32 for information about setting the IP address in

the Macintosh environment.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

Comentarios a estos manuales

Sin comentarios

Axis AXIS USB Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Axis AXIS USB