Axis AXIS USB Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 71
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Basic Installation
14 AXIS OfficeBasic USB & AXIS OfficeBasic Parallel User’s Manual
6. Wait 1 minute. Then press the test button on the print server once. A test
page will be printed on the connected printer. The test page will show a list
of the most important parameters.
Mounting the AXIS OfficeBasic USB
Using the supplied clip and holder, your AXIS OfficeBasic USB can be
mounted in many ways, e.g. on the back of the printer or on a wall.
Methods for Setting the IP Address
The IP address of your print server can be set using one of the following
methods, depending on your network operating environment:
Dynamic IP Address
Assignment
Adhesive
Clip
Fasten to print server by peeling off adhesive
tape.
Adhesive
Holder
Fasten to mounting surface by peeling off
adhesive tape.
Method
Environment/
Server required
Comment
AXIS
AddPrinter
Wizard
Windows 2000, XP
and 2000
Axis software that allows you to find print
servers in your network and assign an IP ad-
dress to them. See “Adding Printers in Windows
2000 / XP / 2003 using AXIS AddPrinter Wizard”
on page 20
DHCP DHCP server
Dynamic assignment of IP addresses. See Dynamic IP
Address Assignment, on page 16
Auto-IP
Windows environ-
ment
Automatic assignment of IP addresses. See Dynamic
IP Address Assignment, on page 16
RARP RARP server
Static assignment of IP addresses. Cannot be used
over routers. See IP Address Management, on page 49
BOOTP BOOTP server
Static assignment of IP addresses. See IP Address
Management, on page 49
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 70 71

Comentarios a estos manuales

Sin comentarios