Axis AXIS USB Manual de usuario descargar pdf (Pagina 55)

Updating the Firmware

AXIS OfficeBasic USB & AXIS OfficeBasic Parallel User’s Manual 55

3. Make sure you are working from the correct directory:

type cd c:\Axis and press Enter.

4. Connect to the print server using ftp:

type ftp 10.13.4.105 followed by Enter.

(Example using print server IP address 10.13.4.105)

5. Enter the user name, the default user is root. Press Enter. If the default

password has been changed then it must also be entered. When you enter

the password, it will not be echoed to the screen, nor will the cursor move.

6. Change to binary mode transfer.

Type bin hash (or binary hash) and press Enter.

7. Use the put command to upload the upgrade file to the flash location:

(Example using firmware named ob_v2.bin):

Type put ob_v2.bin FLASH followed by Enter. (Note that FLASH is written

in capital letters!) A stream of hash (#) marks will appear.

Wait 30 seconds... You will receive a message stating Transfer complete.

Flash programming finished OK. The print server will restart in five seconds

running the new software.

When you see a new ftp prompt the procedure has been completed

successfully.

8. Type bye followed by Enter to end the ftp session.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 70 71

Sin comentarios

Axis AXIS USB Manual de usuario Pagina 55