Axis 247S Manual de usuario descargar pdf (Pagina 4)

AXIS 247S - Product Description

Product Description

Video Server Connectors

Video In

Power out

Video in

Audio in

Line/Mic in

Power out

Network

(PoE)

Control

button

I/O terminal

connector

Indicators for:

Network

Status

Power

75 Ohm switch

PoE

Class 2/

Class 3

Product ID & Serial number (S/N).

The serial number may be

required during the installation.

Product label includes:

Network Connector - The Video Server connects to the network via a standard, shielded network cable, and

automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). PoE Supported.

Control Button - Press this button to restore the factory default settings, as described in Resetting to the

Factory Default Settings, on page 30, or to install using AXIS Internet Dynamic DNS Service (see

www.axiscam.net).

I/O Terminal connector - The I/O terminal connector provides the physical interface to 1 digital transistor

output, 1 digital input and an auxiliary connection point for DC power. See

Unit Connectors, on page 31 for

more information.

Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, Power

Indicators flash as follows:

Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.

Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.

Unlit No network connection.

Status Green Steady green for normal operation.

Amber Steady during startup, during reset to factory default or when restoring settings.

Red Slow flash for failed upgrade.

Power Green Normal operation.

Amber Flashes green/amber during firmware upgrade.

Video Input - Coaxial BNC connector supporting a single composite video source. The physical connection is

made using 75 Ohm coax video cable with a recommended maximum length of 800 feet (250 meters).

Mini-DIN - 6 pin Mini-DIN connector for power out, video in and audio in. See Unit Connectors, on page 31

for more information and a detailed description.

Line/Mic In - 3.5mm input for a mono microphone, or for line-in mono signal (only the left channel is used

from a stereo signal).

Power out - Used to power a camera or other auxiliary equipment 12V DC, max. load 5W (420mA).

For more information on these connectors, please refer to Unit Connectors, on page 31.

LED Color Indication

1 2 3 4 5 6 7 8 9 ... 43 44

Comentarios a estos manuales

Sin comentarios

Axis 247S Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Axis 247S