Axis AXIS 5900 Manual de usuario descargar pdf (Pagina 130)

AXIS 5900 User’s Manual

130

Appendix b Test Button

The test button is located on the front right hand side of the

AXIS 5900 and is used for:

• Printing a test page in order to check the connection to the

printer.

• Printing a parameter list in order to show the AXIS 5900

current settings.

• Resetting the AXIS 5900 parameters to the factory default

settings.

The Test Page Press the test button once to print a test page. The printed test

page contains basic information about the AXIS 5900. It is

recommended that you print a test page every time you have

connected the AXIS 5900 to a printer.

Note:

The Parameter List Press the test button twice to print a parameter list showing the

current AXIS 5900 settings. This list provides comprehensive

details of all the parameters and their current status. Refer to

- Parameter List, on page 138.

If you want to change any of the parameters, use one of the

methods that are described in Section 10 Management and

Configuration, on page 92.

The test page is printed on LPT1 by default. If you want to print the test page on

LPT2, you should set the Internal Printout Destination parameter to LPT2 from

the internal web pages under admin | General Settings | General.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 153 154

Sin comentarios

Axis AXIS 5900 Manual de usuario Pagina 130