Axis AXIS 5900 Manual de usuario descargar pdf (Pagina 26)

Section 4 Basic Installation (Wired & Wireless) AXIS 5900 User’s Manual

Setting the IP address

using Auto-IP

Auto-IP sets the IP-address automatically in the absence of a

DHCP server. If you have a DHCP server running on your

network, the AXIS 5900 will receive an IP address immediately

after you have connected it to the network. In the absence of a

DHCP server, your AXIS 5900 print server will automatically be

assigned an IP-address through integrated Auto-IP. The Auto-IP

address structure is: 169.254.xxx.xxx.

The Auto-IP function will only work when DHCP is enabled in

your Axis print server. This function is enabled automatically

upon installation of a brand new print server.

The easiest way to make sure DHCP and Auto-IP are enabled is

to reset your print server (Factory Default). See Test Button, on

page 130 for instruction on how to do this.

If you perform a factory default on the AXIS 5900 and you do

not have a DHCP server on your network, Auto-IP will

automatically set the IP address of the print server.

Set the IP address

using

AXIS Print System

AXIS Print System is client software used to set the IP address of

your Axis print server and to configure network printers.

AXIS Print System ’Available Printers/Print Servers’ view

Follow these instructions to set the IP address of your Axis print

server and configure the printer to which it is attached:

1. Install AXIS Print System on your host.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 153 154

Sin comentarios

Axis AXIS 5900 Manual de usuario Pagina 26