Axis AXIS 5900 Manual de usuario descargar pdf (Pagina 25)

AXIS 5900 User’s Manual Section 4 Basic Installation (Wired & Wireless)

Setting the IP address

using DHCP

Follow the instructions below to download the IP address using

DHCP:

1. Edit or create a scope in the DHCP manager of the DHCP

daemon. The entries included in this scope should contain the

following parameters:

• range of IP addresses

• subnet mask

• default router IP address

• WINS server IP address(es) or DDNS server IP address(es)

• lease duration

2. Activate the scope. The AXIS 5900 automatically downloads the

DHCP parameters. If you are using WINS or DDNS, you should

include at least one WINS or DDNS server IP address in the DHCP

scope. Immediately after the IP address has been received, the

AXIS 5900 registers its host name and IP address on the WINS

alternatively DDNS server. Refer to Registering and Resolving

Host Names, on page 23 for more information. The AXIS 5900

can automatically download a customized config file from a TFTP

server. Just add the name of the config file and the TFTP server’s

IP address to your DHCP scope. The config file is downloaded

immediately after the AXIS 5900 receives its IP address.

3. You have now successfully set the IP address of your AXIS 5900.

Continue to Configuring your print server, on page 34.

Note:

You have to restart the AXIS 5900 to download the IP address

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 153 154

Sin comentarios

Axis AXIS 5900 Manual de usuario Pagina 25