Axis AXIS 5900 Manual de usuario descargar pdf (Pagina 54)

Section 5 Setting Up - Windows AXIS 5900 User’s Manual

Notes:

Alternative Method for

LPR Printing

If you wish to print over LPR but do not wish to install Print

Services for Unix you can do this by changing the printing

protocol after having installed the printer using the Standard

TCP/IP method, see TCP/IP printing in Windows 2000 and

Windows XP, on page 36 for instructions.

Once the printer is installed follow these instructions to change

the printing protocol:

1. Double-click the installed printer in Start | Settings | Printers.

2. Select Properties from the Printer menu.

3. Click the Configure Port button.

4. Click the LPR radio button and enter the queue name (pr1 or

pr2).

5. Click OK to finish.

Using the Microsoft

LPD monitor with

Windows NT 4.0

This section describes how to set up a Windows NT Server v4.0

for LPR printing over the TCP/IP protocol, using the built-in

Microsoft LPD monitor.

Basic Setup If you have not already done so, you should perform the TCP/IP

basic setup procedures prior to installing a printer for LPD

printing.

• Make sure that the Automatically detect and install my Plug and Play printer

checkbox is not checked

• Press F1 to access the Windows online help system if you need additional help

when installing a printer/print server using this method.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 153 154

Sin comentarios

Axis AXIS 5900 Manual de usuario Pagina 54