Axis AXIS 5900 Manual de usuario descargar pdf (Pagina 33)

AXIS 5900 User’s Manual Section 4 Basic Installation (Wired & Wireless)

WEP Parameters Click the Edit WEP Parameters button. You will be prompted

for the root password (default pass). Enter the WEP keys and

click OK to save your settings.

Notes:

Once you have entered the WLAN settings to match your

network, click OK to save your settings.

Proceed to Configuring your print server, on page 34 to set up

your AXIS 5900 and the connected printers for printing.

WLAN SSID The default SSID (service set identifier) in the AXIS 5900

is ’AXIS’ followed by the last six digits of the serial

number, e.g. AXIS100086

Note: the SSID must match the SSID of the WLAN

network interface. This is set using the computer’s

wireless configuration software.

WLAN Channel The default setting is channel 11 (Japan - channel 14)

See Technical Specifications, on page 132 for more

information

WLAN Fragmentation

Threshold

These parameters are used to optimize the data

transmission in accordance with the IEEE 802.11b

standard.

WLAN RTS Threshold

WLAN Parameters Description

Edit WEP Parameters Click the button to access the WEP parameter settings

Note: Java must be enabled in your web browser.

WEP Encryption Level WEP security. The default setting is that WEP encryption

is disabled. Select 64 Bit or 128 Bit security level. 128

Bit encryption level is the highest level of security but

may reduce the performance level.

Active WEP key Select the appropriate WEP key as specified by the

network administrator

WEP key x Enter the WEP keys (hexadecimal values) specified by

the network administrator

Enforce WEP When enabled, the print server will not allow access to

clients without a WEP key

Once you have clicked the OK button, the WEP parameter settings will be saved

and cannot be cancelled by clicking Cancel on the WLAN page.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 153 154

Sin comentarios

Axis AXIS 5900 Manual de usuario Pagina 33