Axis RightFax 8.5 Guía de instalación descargar pdf (Pagina 42)

42 Appendix A Installing RightFax in a Windows NT 4.0 or Windows 2000 Cluster

Installing the RightFax Server

When the software installation is complete, create the RightFax cluster resources (described on

page 43).

Installing RightFax on the two cluster nodes

Before installing RightFax on the two cluster nodes, ensure that a PCL5 printer driver (such as HP

LaserJet 4) is installed on both computers. If not, install the driver by adding a printer in Windows.

When prompted for a printer port, select File. Use the default printer name and do not print a test

page. This step allows RightFax to create a print-to-fax queue during the server installation.

1. On both nodes, ensure that System group has full control of the System drive (the drive that

Windows is installed on) including all subfolders and files.

2. On the primary node, install the RightFax server software to the shared drive according to the

instructions in Chapter 3, ”Installing the RightFax Software”. If prompted to restart the

computer at the end of the installation, select No. Do not install the fax board hardware drivers.

3. After RightFax is installed on the primary node, open the BoardServer configuration program in

Windows Control Panel, and then click OK. This starts the RightFax BoardServer service on the

primary node.

4. Open the Windows Services configuration program, stop all RightFax serveices, and set them all

to manual start.

5. Open the Printers configuration program in Windows Control Panel and turn off sharing for the

HPFAX printer.

6. Shut down the first node and wait for the drive to failover to the second node.

7. On the secondary node, install the RightFax server software to the same shared drive you used

for the first node. If prompted to re-start the computer at the end of the installation, select No. Do

not install the fax board hardware drivers.

8. After RightFax is installed on the secondary node, open the BoardServer configuration program

in Windows Control Panel, and then click OK. This starts the RightFax BoardServer service on

the secondary node.

9. After RightFax is installed on the secondary node, open the Services configuration program in

Windows Control Panel and set all of the RightFax services to manual start.

10. Open the Printers configuration program in Windows Control Panel and turn off sharing for the

HPFAX printer.

11. Re-start the first node and let it take control of the group.

Configuring the shared drive

1. Using a text editor, edit the file SetupInfo.ini located in the \RightFax\Client\Win32 folder.

Change the Server Name value to the name of the cluster.

2. Create a folder on the shared drive called “Spool.” This folder will be used to specify where the

Print Spooler service will place its spool files.

1 2 ... 37 38 39 40 41 42 43 44 45 46

Sin comentarios

Axis RightFax 8.5 Guía de instalación Pagina 42